Diy Basement Remodel for Basement Exposed-Channel
Diy basement remodel – For remodeling basement exposed-channel, you can attach the channels in a box running along the ceiling or wall. This alternative, non-vents, are good if you have the materials and extra time. It will take up more space, leaving less space in some cases, and it can be hard to do. The enclosed area must be built by a 2-by-4-inch board frame and gypsum and run the entire length of the channels. Benefits include the ability to install lights along this box. And the reduction of noise coming from the air ducts. The enclosed area must meet building codes for closed channel system.
Another option of diy basement remodel for Basement exposed-channel is to hide the channel either by enclosing the roof, or by building the roof around it. If you choose to enclose the channel by installing a drop ceiling over it, you may encounter problems with the ventilation system in what is now a small, enclosed area. This is recommended only if the system does not ventilate the room. Hides the channel is a better option. It allows the system to continue ventilation in the basement and cause fewer problems, mechanically on the road.
You can hide channels behind natural wooden beams, which will also lend character to your cellar. For diy basement remodel for Basement exposed-channel, you can also install a trellis, or framed beamed covered with plaster, to prevent the view of the canal. This beam must be placed where it can obstruct the view and does not block ventilation. Another easy option is to paint the channels of two-layer or single color that matches the color of the roof.